Publications

Computational chemistry (CC) is an important and essential area within chemical sciences. Over the years, CC has developed rapidly and played a significant role in chemistry research. In addition to the centrality of CC in the chemical sciences, teachers and students should be exposed to contemporary research for many reasons. These reasons include elevating student motivation to study science and engineering and increasing student interest in scientifically oriented careers. For teachers, contemporary research can trigger their professional development and keep them up to date with current research in their teaching field. However, the integration of CC tools within chemistry education can be challenging for both teachers and students. Here we describe a course on CC for high-school teachers. The goal was to introduce the teachers to contemporary CC contents and tools and motivate them to utilize their knowledge in the teaching of chemistry. We describe the course structure and contents that included lectures, hands-on workshop exercises, and assignments. The rationale behind each part of the course is detailed and the workshop instructions that were conducted using the free Avogadro software are completely presented in the Supporting Information. The course evaluation indicated that teachers improved their contemporary CC content knowledge and were satisfied with how the course contributed to their chemistry teaching.

One of the primary objectives of an education system is to prepare students for their adult lives by imparting them with the requisite knowledge, qualifications, and skills that will enable them to confront future challenges effectively. A whitepaper published by the Israeli Ministry of Education titled "The Graduate's Image"stresses the importance of incorporating specific skills into the school curriculum. However, there is a lack of educational programs that can transform teaching skills into actual practice. In light of this conclusion, we developed the program "Chemistry, Climate & the Numbers in Between"to foster these skills and produce graduates with the ability to adopt a critical approach and a well-informed perspective toward the world. In this paper, we delineated the cognitive skills developed in the program. The results indicate that innovative program can be utilized to integrate several important skills into a chemistry lesson. The program has the potential to equip and empower future citizens to address and tackle global challenges while utilizing cognitive skills using chemistry knowledge. However, it is important to note that learning in this way requires much more time than a regular lesson does and requires a significant commitment and investment from the teacher.

An understanding of how students learn chemistry and what can support better chemistry learning is a research field that has continuously developed during the last 50 years. Chemistry education researchers study how different teaching strategies either support or inhibit chemistry learning. They study the role of models and the process of modeling in chemistry learning and teaching. They examine ways in which technology can be integrated into chemistry teaching to surmount the difficulties associated with learning abstract chemistry concepts, which was recently demonstrated during the Covid-19 pandemic. They look for assessment approaches that can guide teaching, reflect goals, and promote learning of scientific concepts and skills. These studies, which enhance our understanding of learning and teaching chemistry, should be part of chemistry teachers toolbox and support their professional development. However, these studies seldom reach teachers and therefore are usually not put into practice as much as they should. In this special issue we aim to bridge this gap and to bring the contemporary studies in chemistry education, which were presented in the 15 ECRICE 2022 conference, the European Conference on Research in Chemical Education, which was held at the Weizmann Institute of Science in July 2022, to the international community of chemistry teachers. This collection of papers presents six contemporary issues in chemistry education research: teaching strategies, models and modeling, technology for chemistry teaching and learning, development of student skills, personalization of chemistry teaching for including a variety of students in the chemistry classroom, and finally, assessment, whichis an essential component of any learning process.

This essay reviews the literature relating to the characteristics and learning outcomes of educational escape rooms (EsRms), in general, and presents the work of a research and development group devoted to the design, implementation, and research of chemistry escape rooms (ChEsRms), in particular. The administrative and pedagogical dimensions of recreational, informal, and formal EsRms are compared. A consensus emerges from the literature that educational EsRms are highly appealing to both students and teachers. The different learning outcomes can be classified in terms of affective outcomes, general skills, and content-specific knowledge and skills. The essay presents the research and development of six ChEsRms for different topics in the high-school chemistry curriculum, in three variations – mobile, do-it-yourself, and virtual – and discusses several design challenges, such as balancing the tension between maintaining a game-like atmosphere of informal learning while facilitating student learning. Research findings on student and teacher outcomes relating to the ChEsRms are summarized, leading to a four-stage implementation model that may contribute to teachers' willingness to invest their time and effort in these environments that bridge between formal and informal science learning.

This work details the ramifications of online learning using a novel, personalized learning system regarding high-school students’ experiences, attitudes, self-efficacy, and achievements during the 2020–2021 school year. Although research has explored the implications of remote and online learning on education worldwide, little attention was dedicated to high-school students’ experience with, and their inclination towards, learning with such systems. The research was conducted on high-school chemistry students in a mixed-method approach. We found a significant rise in students’ attitude towards the use of technology in chemistry classrooms, and their self-efficacy to learn chemistry using technology, whereas no significant change was found regarding students’ attitudes towards the personalization of chemistry and chemistry as a subject. Students who learned using the system’s personalization capabilities had a significant rise in their grades, compared with students who did not receive the full treatment. Qualitative analysis of students’ responses to open-ended questions revealed the changes in students’ experiences with the online, remote learning process, derived from their interfaces with the learning process, as they grew more accustomed to the system, understood it better, and saw its benefits to their chemistry learning. The reasons for the misalignment of the findings in this work, along with global trends in online learning are discussed, and future directions for research are proposed.

Diversity and differences between students are the reality that teachers deal with daily. To address this reality, developments in education aim to provide teachers with the knowledge and requisite skills needed for differentiated instruction (DI). DI is a pedagogical-didactic approach that enables teachers to systematically address students' diverse learning needs. However, no validated instruments currently exist to measure or evaluate teachers' and students' beliefs toward DI in chemistry. Hence, there is a need to develop such questionnaires to examine students' and teachers' sense of self-efficacy (SE) and attitudes (AT). We describe the development and validation processes of such questionnaire that have been developed based on relevant literature on DI and on teachers' experience with DI in a heterogeneous classroom. The items were validated by experts' panel, a readability test, and a field test. A confirmatory factor analysis was undertaken to investigate the factor structure of the teachers and students' questionnaires based on pilot test reliability, Cronbach's alpha revisions, and rerun alpha. As a result, the SE and AT of students towards DI instrument entailed 38 items with a five-factor structure indicating a high reliability. Three factors of attitudes, (α) = 0.98, and two factors of self-efficacy, (α) = 0.91. The SE and AT of teachers entailed 55 items with a five-factor structure indicating a high reliability of self-efficacy, (α) = 0.95 and of attitudes towards DI in heterogeneous chemistry classrooms, (α) = 0.93.

The setting of this study is a remote laboratory with a scanning electron microscope (SEM). The SEM is an advanced instrument used by scientists to characterize structures in the nanoscale. The remote SEM activity was structured to address different practices of laboratory inquiry. Secondary chemistry students were requested to prepare at home suitable samples for the SEM device, send the samples to a research institute, and operate the SEM device remotely to study their samples. The scientists and the science teacher supported the students, for example, by providing information on how the SEM works and how it is used in contemporary scientific research. A qualitative analysis of data collected during the activity and students' openended feedback in a postquestionnaire identified different inquiry practices according to acceptable science education standards. The "hands-on" practices (e.g., preparing SEM samples and collecting data) engaged the students more in the SEM activity than did the "minds-on" inquiry practices (e.g., analyzing and interpreting data). Students' emotions were also evaluated for the remote SEM setting and the school setting using a semantic differential emotions questionnaire (SDEQ). The paper describes the development of the SDEQ and its validation process. Addressing the emotional aspects and applying the SDEQ revealed that the remote SEM learning environment induces positive emotions for students; these emotions cannot be predicted by students' emotions in a school science setting. This shows the potential of the "emotions-on" aspect to shed new light on inquiry practices and support the inclusion of different students in developing laboratory skills.

Despite unprecedented global challenges to the environment, research show that many young people are pessimistic about their ability to address these challenges. This paper explores one approach designed to guide middle-school teachers and their students to develop and practice agency about sustainability issues: via a curriculum that challenges students to solve problems by analyzing real-world data and developing scientific arguments, as a basis for engaging in activism. The paper begins with an overview of the United Nation's Agenda 2030, its Sustainable Development Goals (SDGs), the related aims of Education for Sustainable Development (ESD), and a review of what is meant by student agency. Next, the goals and design features of a curricular initiative, "Speak to Me in Numbers," are presented with a brief presentation of two units, each based on a different SDG. The paper's research questions are (1) How were the design features of the curriculum perceived by the teachers? and (2) What were the preliminary outcomes of the curriculum in terms of student and teacher argumentation skills and student activism? To address these questions, we present an exploratory study: observations and comments from in-service teachers and participating students regarding preliminary outcomes of the curriculum that might be related to the development of student agency. In our concluding discussion, based on these findings and relevant literature, we suggest that a promising pedagogy to strengthen student agency on sustainability issues is a data-driven pedagogy that focuses on the development of scientific argumentation, mathematical thinking and activism.

The experience of graduate degree lecturers in the natural sciences when they switched to online teaching during the Covid-19 pandemic is described. The shift to online teaching throughout the pandemic provided an opportunity to evaluate how lecturers integrate technology into their teaching and what they need to improve their remote teaching. This study used a twofold perspective of TPACK (Technological Pedagogical Content Knowledge) and self-efficacy in online education. Its data were derived from pre-and post-questionnaires, comprising closed and open-ended questions, given at the start and end of the semester. We found that lecturers focused on learning and applying technological and techno-pedagogical knowledge but paid less attention to the integration of three components: technology, pedagogy, and scientific content. Although no statistically significant differences in lecturers’ perceived self-efficacy was found between the start and the end of the semester, at the end of the semester we found a statistically significant correlation between the variables involved in building self-efficacy in online teaching: (1) satisfaction with online teaching and the belief that (2) technology promotes teaching, student interactions, participation, and engagement. Our results enabled us to identify the knowledge aspects that lecturers implemented initiatively and to better understand what aspects required more professional development training. In addition, the results emphasized the importance of developing the lecturers’ self-efficacy for online teaching. These insights can help to improve and enhance online teaching in higher education.

Professional development courses help teachers integrate new content knowledge into the high-school curriculum. Designing practical online courses for this purpose is challenging, particularly in emerging fields such as nanotechnology. In this study, we evaluated such a course in three complementary dimensions: (1) knowledge, (2) the complexity of learners' understanding, and (3) learners' difficulties during the course. We evaluated the first aspect using a pre-post-knowledge test, the second using the Structure of the Observed Learning Outcome (SOLO) taxonomy applied to the course's assignments, and the third by analyzing online activity reports and semi-structured interviews. Three cohorts comprising 95 teachers participated in this course from 2016 to 2019. Our multi-dimensional analysis revealed that teachers' knowledge of nanotechnology concepts improved. They were able to connect the advanced content they learned to the high-school chemistry curriculum at different levels of complexity. The evaluation process also enabled us to identify difficult sections of the course. These findings can contribute to designing the curriculum of future professional development online science courses in terms of the intended learning outcomes.

This study examined learning processes in undergraduate online general chemistry courses. The study aimed to characterize learners according to their learning patterns and to identify indicators that predict students' success in an online environment. Specifically, we focused on the role of a central factor affecting success in online courses: self-regulated learning and learner engagement. To this end, we used a mixed methods approach that combines semi-structured interviews and statistical analysis. We applied two logistic regression models and a decision tree algorithm and found two parameters that can predict completion of the course: the submission status of an optional assignment and the students' cumulative video opening pattern (SCOP). Recommendations for institutions and lecturers regarding the benefits of implementing these models to identify self-regulated learning patterns in online courses and to design future effective interventions are discussed. Regarding students, we emphasize the importance of time management and how choices they make with respect to their learning process affect their potential for success.

Chemical escape rooms (ChEsRms) are educational games in which students use their brain, chemical knowledge, intuition, and a bit of luck to solve a mystery. At the Weizmann Institute, we have developed ChEsRms that are implemented by teachers in their classes. Since the COVID-19 pandemic stopped all the educational activities that took place in physical space, we decided to design a virtual ChEsRm (VChEsRm) that is fully conducted in digital space. We describe the design principles that characterize the VChEsRm and present the students' and teachers' perceptions of the VChEsRm and how it differs from the ChEsRm. We describe "The Masked Scientist", a VChEsRm in which students must identify a scientist using their knowledge of basic topics in the chemistry syllabus: the model of the atom, radioactivity, and the periodic table. This VChEsRm has added values, a connection to history, human rights, and sustainability, as well as interesting and surprising chemical facts related to everyday life. Since it is conducted in virtual space, it could also include experiments, procedures, and materials that are dangerous and therefore forbidden in a physical ChEsRm or that could even change the course of history. Importantly, this 90 min activity includes the VChEsRm (9 puzzles) and a 45 min follow-up session that deals with the ideas behind the puzzles. It was translated from Hebrew to Arabic and English; therefore, high school and general chemistry teachers around the world can easily use the VChEsRm in their class after reading this paper by clicking on the link.

Molecular animations can be beneficial as teaching tools for genomics education; however, barriers to their effective implementation remain. This article proposes informed design guidelines from the perspective of the animator that may assist others to effectively communicate scientific concepts to their respective audiences and communities.

In this paper, we describe the structure, development, and validation process of customized pedagogical kits (CPKs) for differentiated instruction (DI) in chemistry. The CPKs rely on the DI approach, comprising varied pedagogical activities (e.g., games, inquiry activities, puzzles, simulations, models) designed as treatments, to help chemistry teachers personalize their teaching according to students’ misconceptions. The kits are based on the response to intervention (RTI) model, where the teacher applies an ongoing evaluation to meet the individual student’s needs within an evolutionary flexible process of learning. Each kit includes a diagnostic task, its characterization, pedagogical treatments for diagnosed misconceptions, and an assessment task, to evaluate the effectiveness of the treatments implemented in the classroom. The kits are developed along relevant literature criteria for using DI strategies and are based on constant validation and ongoing assessment, as demonstrated in the Redox-reaction CPK development. The validation and impact of the CPK on students’ achievements are supported by 25 chemistry teachers that implemented the full kit in their classrooms. Furthermore, the CPKs developed in the present research have succeeded in resolving many of the difficulties and challenges mentioned in the literature as obstructing the implementation of DI.

Before March 2020, with the outbreak of the COVID-19 pandemic, remote instruction of science was only moderately developed compared with more traditional approaches for learning science. Since the outbreak, however, all formal education systems have been carried out in remote mode, and outreach activities that take place in a research or academic setting have usually been canceled, or there has been a search for innovative approaches to shift to digital space. Therefore, the development of learning and teaching strategies has currently focused on remote activities. In this study, a design-based approach was applied to transform an existing authentic science activity using a scanning electron microscope (SEM) from face-to-face to remote learning mode. The remote mode activity included the remote operation of the SEM by the participants. The goal was to formulate a general approach to transform authentic outreach activities from face-to-face to remote operation. To evaluate the design, we compared learners' perceived authenticity in the 2 modes and reflected on the process. Data were collected with a Likert-type questionnaire regarding participants' perceived authenticity. The results suggest that items of authenticity related to the experience of learning content have a positive potential for use in remote mode. The learners' experience of connecting with the scientists is an apparent disadvantage in remote mode. However, changes in communication technology or in the pedagogy of remote teaching is a promising direction for improving social experience.

Professional learning communities (PLCs) have been touted as an effective form of teacher professional development. Teachers’ PLCs support their professional development among their peers and usually include teachers at different levels of seniority. This chapter reviews literature on how PLCs address teacher needs at each stage of their careers and included research published since 2005. The main finding of the current review is that the literature about PLCs does not address the differentiated characteristics of teachers at varying career stages. The few studies that referred to teachers at different career stages in the PLC distinguished only between the new teachers and the experienced ones, or examined only the new teachers. Only one study was found that examined the full range of teachers’ career stages in the PLC. The chapter recommends further research that more closely examines what might be lost or what might be gained by expectations in PLC work that do not currently account for this differentiation, along with practical steps to address this issues. Embracing the idea of differentiating PLCs can help to make them a more impactful endeavor for addressing the learning of all teachers.

Owing to the COVID-19 pandemic, all teachers’ training courses scheduled for summer 2020 had to transition to online formats. For the arts-integrating course “Teaching Chemistry by a Creative Approach”, this shift jeopardized the course’s essence, since learning by this approach is based on creative, hands-on, and active learning. Here we describe how the course format and contents evolved from a planned face-to-face format to an adapted, successful online learning experience. Two main goals were considered during the adaptation process: (1) making available to teachers the theoretical and practical backgrounds necessary to internalize the arts-integrating approach through creative, active learning strategies, and (2) providing teachers with actual tools through which they can rethink and develop their own teaching materials to suit remote teaching by incorporating supporting neuropedagogical aspects. Evaluating the immediate and follow-up questionnaires, as well as the assessment of teachers’ course assignments, suggests that the online course successfully preserved the essence and the main objectives of the original course, that the course was useful for remote teaching, and that it seems to have had an impact on teachers’ practices. We attribute this impact to the well-thought-out process of adapting the course to promote creative, active online teaching and learning. In addition to modifying the course’s format, this process expanded the arts-integrating approach to acknowledge the inherent difficulties in learning chemistry, existing also while learning online. We propose this process as a model to be used by educators to rethink and adapt their own practices to improve distance chemistry teaching and learning.

Dr. Rachel Mamlok-Naaman, from the Weizmann Institute of Science in Israel, is a distinguished researcher in chemistry education. This paper presents an interview that was conducted in light of her achievements and in recognition of her receiving the IUPAC 2021 award for Distinguished Women in Chemistry or Chemical Engineering.

Understandings of the nature of scientific inquiry (NOSI), as opposed to engaging students in inquiry learning experiences, are included in science education reform documents around the world. However, little is known about what students have learned about NOSI during their pre-college school years. The purpose of this large-scale follow-up international project (i.e. 32 countries and regions, spanning six continents and including 3917 students for the high school sample) was to collect data on what exiting high school students have learned about NOSI. Additionally, the study investigated changes in 12th grade students' NOSI understandings compared to seventh grade (i.e. 20 countries and regions) students' understandings from a prior investigation [Lederman et al. (2019). An international collaborative investigation of beginning seventh grade students' understandings of scientific inquiry: Establishing a baseline. Journal of Research in Science Teaching, 56(4), 486-515. https://doi.org/10.1002/tea.21512]. This study documents and discusses graduating high school students' understandings and compares their understandings to seventh grade students' understandings of the same aspects of scientific inquiry for each country. It is important to note that collecting data from each of the 130+ countries globally was not feasible. Similarly, it was not possible to collect data from every region of each country. A concerted effort was made, however, to provide a relatively representative picture of each country and the world.

Using three-dimensional models in chemistry is a common teaching practice aimed at elevating the level of understanding of abstract concepts. However, the experience of using chemical models is still quite passive in terms of students’ input, requiring the students to utilize mainly visual, auditory, and some tactile information processing pathways. We present here a sequence of four short activities, which together constitute a change in the traditional teaching practice regarding molecular geometry. The goal is to offer a more active approach to working with models, one that involves multiple content processing pathways and exposes the learner to varied modes of learning. This set of activities was developed in line with the neuropedagogical literature while keeping in mind the brain mechanisms expected to affect learning and memory consolidation. We kept the activities simple so that implementation requires only minor adjustments to the routine practice, thus making this neuropedagogical approach accessible to chemistry teachers. A positive contribution of this kind of approach was evident from the scores of 10th grade chemistry students during consequent pilots.

Research based on educational data mining conducted at academic institutions is often limited by the institutional policy with regard to the type of learning management system and the detail level of its activity reports. Often, researchers deal with only raw data. Such data normally contain numerous fictitious user activities that can create a bias in the activity trends, consequently leading to inaccurate conclusions unless careful strategies for data cleaning, filtering, and indexing are applied. In addition, pre-processing phases are not always reported in detail in the scientific literature. As educational data mining and learning analytics methodologies become increasingly popular in educational research, it is important to promote researchers and educational policymakers' awareness of the pre-processing phase, which is essential to create a reliable database prior to any analysis. This phase can be divided into four consecutive pre-processing stages: data gathering, data interpretation, database creation, and data organization. Taken together, these stages stress the technical and cooperative nature of this type of research, and the need for careful interpretation of the studied parameters. To illustrate these aspects, we applied these stages to online educational data collected from several chemistry courses conducted at two academic institutions. Our results show that adequate pre-processing of the data can prevent major inaccuracies in the research findings, and significantly increase the authenticity and reliability of the conclusions.

The authors analyze chemistry teachers' discourse in a WhatsApp group. This online communication platform is used for continually studying the communication behavior of leading chemistry teachers who are members of a professional learning community (PLC). They describe the network of chemistry teachers' PLC in Israel, which provides the context for the study. WhatsApp enables sustained ongoing, intensive interaction, and sharing of knowledge that is practical, directly related to the members' needs, and is participant driven and constructivist in nature. A theoretical perspective of teachers' knowledge and professional development (PD) was developed in 2015 by Gess-Newsome, which was applied to examine the mechanism underlying teachers' knowledge development.

If we adults compare our children’s science curriculum to what we studied three decades ago, we will usually find that the difference is small, even nonexistent. Yet, scientific knowledge is constantly accumulating and new fields are reshaping scientific research. The educational system and learning programs react slowly to these changes. One might ask why we should change a science curriculum that covers the chosen basic concepts of science well. To answer this question, we must first examine the contribution of introducing modern science into the school. Once this approach proves valuable, we should design a methodology to invigorate the school science curriculum with new scientific developments. Contemporary research encompasses numerous fields and has developed in many different directions. My research group has chosen to focus on one case of contemporary scientific research – nanotechnology, also known as nanoscale science and technology (NST) (Jones et al., 2013). In this chapter, I describe my 15-year research journey, with my students and colleagues, to develop methods and tools that will enable introducing NST into school science.

This chapter presents different nanoscale science and technology (NST) programs that were developed for high school students. The motivation to teach NST for school students is a question that often arises in academic science education circles. The programs that were included were ranked according to their main nanoscience concepts. Students should be taught about the properties of materials and should be allowed to identify and characterize them. They tend to think that if a property changes it means that one material was replaced by another. The nanoscale challenges this understanding by exposing people to properties that are size dependent as well. The concept of size-dependent properties includes four sub-concepts. The effect of the concept size-dependent properties led to the creation of new properties of known elements and materials. Educational researchers in Mexico showed that this concept can be approached successfully with a simple experiment and a very relevant topic.

This chapter addresses the challenges that educators at the precollege, undergraduate, graduate, and informal education levels face as they design and implement nanotechnology education programs. Educators have begun to identify those cross-cutting themes and big ideas that are associated with teaching about nanotechnology. Nanotechnology is typically defined as science and technology that takes place at the nanoscale in at least in one dimension – thus including films, wires, and particles. The survey respondents who taught at the primary-/ elementary-school level indicated that in most cases nanotechnology is not part of the school curriculum. Nanoscale science and technology is most often taught at the graduate levels and is often associated with ongoing research in these areas. Survey respondents noted that the interdisciplinary nature of nanotechnology is a challenge. Teachers’ extrinsic barriers to utilizing nanoscience laboratories relate to money and time.

This chapter presents different nanoscale science and technology (NST) programs that were developed for high school students. The motivation to teach NST for school students is a question that often arises in academic science education circles. The programs that were included were ranked according to their main nanoscience concepts. Students should be taught about the properties of materials and should be allowed to identify and characterize them. They tend to think that if a property changes it means that one material was replaced by another. The nanoscale challenges this understanding by exposing people to properties that are size dependent as well. The concept of size-dependent properties includes four sub-concepts. The effect of the concept size-dependent properties led to the creation of new properties of known elements and materials. Educational researchers in Mexico showed that this concept can be approached successfully with a simple experiment and a very relevant topic.

In this Communication paper we describe how a research-based approach was applied in Israel to support high-school chemistry teachers, who continued to teach using technology during the COVID-19 pandemic. Within the TPACK (technological pedagogical content knowledge) framework for teachers’ knowledge in technological environments, we developed a questionnaire for chemistry teachers, with the goal to reveal the difficulties they encountered, their needs, and their means for sharing their knowledge, materials, and teaching strategies for online teaching. On the basis of the analysis of the collected data, we provided a research-based response that focused on the teachers’ needs when using technology to teach chemistry. Teachers’ needs, in terms of their knowledge, skills, and means of support, which were identified in the research and the activities that were developed in order to address them, are presented. We emphasized the research-based process that was applied to address teachers’ needs during the pandemic.

The Weizmann Institute of Science in Israel provides several programs, both for school students and teachers, to obtain insights and learn about modern research and analytical techniques. This chapter will provide an overview of three different programs and explore the approaches and their influence on the participating students (or teachers). The different programs differ in their goals and target population: religious students with no chemistry background, chemistry teachers and gifted students. The programs length varied from a two-day experience, two weeks in a research lab, or a year and eight months in a research lab for gifted students. We provide research results that helped us realize the different contributions of each program to the participants. Including three different programs in the same chapter provides the reader with different approaches of introducing students and teachers to active research chemistry laboratories that eventually support the outreach efforts of the research institute along with their educational contribution.

Recent technological advances have allowed for the use of computerized and online systems to achieve personalized student-centered learning and teaching in the classroom. One such prominent example is the PeTeL system (Personalized Teaching and Learning), developed by the Science Teaching Department of the Weizmann Institute of Science. In the present article, we describe the initial stages of the system's first implementation in chemistry classes, and show how it facilitates the hybridization of learning by combining online materials and offline activities. The research focuses on different hybridization models applied by chemistry teachers in their teaching, which demonstrate the efficacy of the PeTeL system in hybrid learning. Four case studies of a teaching unit dealing with melting points are discussed, and the considerations of two chemistry teachers using the system who adjust their teaching sequence to the personalized needs of their students in four different classes are presented. The results underscore the importance of providing teachers with the capacity and tools to personalize their teaching paths in a way that better supports hybrid teaching matching their pedagogical considerations. A new approach to the construct of hybrid teaching is proposed, considering it as a set of axes instead of one continuum.

The goal of this research is to provide a rich set of connections between two fields: (i) Nanoscale science and technology (NST) and (ii) topics from a common middle school physics curriculum. NST is emerging as one of the most promising new fields of the 21st century, which is one of the many arguments for including NST topics in secondary science education. A specially designed guided discourse with NST scientists was used to produce a map of connections between the two fields. During the discourse, the scientists were presented with two sets of concepts using a visual board and were asked to find connections between them. All suggested connections and the corresponding context offered by the scientists were arranged and presented as a rich set of connections. For example, (i) the NST concept of characterization methods is connected to mechanical forces and can be explained using the example of an atomic force microscope; (ii) the NST concept of size-dependent properties was connected to 7th grade inquiry skills by explaining the size dependence of accuracy, errors, and defects. This set of connections was validated by an experienced middle school science teacher in an open discussion regarding teachers adopting and implementing the resulting insertion points for the curriculum. This resulting set of connections can be used to enrich the curriculum within the NST field. It also provides a perspective on scientists' views regarding insertion of contemporary NST topics into physics middle school education.

A one-hour guided discourse was designed to support developing the outreach communication skills of physics experts with middle school students. The participants consisted of 12 physics researchers who conduct research in the field of nanoscale science and technology (NST). The guided discourse consisted of a professional development task for preparing the researchers to communicate their NST research. Each scientist was presented with two sets of concepts (NST essential concepts and middle school physics concepts) using a visual board and was asked to find connections between them. Before and after linking the two sets of concepts, the scientists were invited to describe their research. The findings showed that a change had taken place in the concepts the scientists used to describe their research: an increased use of concepts from middle school physics and a decreased use of complex scientific jargon. A qualitative examination of the results revealed different types of participants, based on the way the scientists were influenced by the task. Each of the three types of science communicators is presented as a case study. We suggest that this task can be applied to prepare scientists to communicate with middle school students.

A professional learning community (PLC) is one of the most promising means for promoting teachers’ professional development. For building a mature and strong community of educators, where members are more engaged, share practices, collaborate in their teaching, and make their teaching public, it is crucial to develop a real sense of community (SoC). A major factor in establishing a SoC is the integration of an online platform, which creates a new type of social space where members can learn and socialize across boundaries of time and place. WhatsApp is a widely used smartphone application that enables and enhances group communication as it knits together the community. In this study we examined the leading chemistry teachers’ PLC, which meets every other week. Between the meetings, the members use a WhatsApp group that provides an online communication platform. WhatsApp group discourse was analyzed throughout two academic years. It was found that the discourse can support the creation of four elements that are needed for creating a SoC. Supporting mechanisms underlying SoC development were identified, and accordingly, methods to be employed by the group leaders to strengthen the SoC were recommended.

This year (2019) represents the 150th year since the discovery of the periodic table of the elements (PTOE). In honor of this important event, we designed a PTOE chemical escape room (called ChEsRm) that is suitable for middle and high school chemistry students. The main idea behind this ChEsRm is that it is relatively easy and inexpensive for teachers to build in order to introduce the activity into as many chemistry classrooms as possible. The puzzles of ChEsRm include interesting facts regarding the elements, their every day use, and their properties, as well as the subatomic particles. Some involve actual experiments and other nonlaboratory activities. Participants are asked to solve a mystery: finding the cause of a mysterious death. Although most escape rooms use locks and keys, in this case the mechanism used to reveal the solution is different and more flexible. Here we provide a detailed description of all the puzzles and explain how to operate the escape room in a school lab.

The call for integrating systems thinking (ST) with chemistry education focuses on the growing role chemistry will play in meeting global challenges, such as those presented by the United Nations' Sustainable Development Goals. In this essay, we address two questions: How might ST help chemistry education address these global challenges? How might we prepare teachers to teach ST in their classrooms? To address these questions, we define these global challenges in terms of coupled human-natural systems, and we suggest a new way to integrate "the human element" into ST in chemistry education; namely, via the responsible research and innovation framework. We then demonstrate how this framework could be used productively to guide the professional development of chemistry teachers.

Two different approaches for chemistry education are presented in this paper: teaching and learning chemistry through contemporary research and using a historical approach. Essential dimensions in science education are used to study the differences between the two approaches. This includes the rationale of each approach, the scientific content, as well as students’ and teachers’ perspectives. At first glance, the two approaches look different and even contradict each other. However, a deeper investigation shows that there are common themes that connect the two approaches. Chemistry education is used to represent the historical approach and Nanoscale Science and Teachnology (NST) in chemistry education is used as the context for learning science through a contemporary research approach. The paper can be used by chemistry teachers as a preliminary guide for consideration of adapting one of these approaches in their class.

The chemical sciences integrate numerous pieces of structural data into families of compounds, and countless experimental results of reactive processes into ground rules. Collecting these pieces of information, analyzing them, and making the relevant contextual connections between them is in the heart of chemistry education. Here we emphasize the contribution of technology, and more specifically, chemical databases for enhancing these learning processes. Several important, open access, databases are described in detail and examples of using them in chemistry class are provided. In an era of continuous information revolution we hope that chemistry instructors will take the next step up, and acquire the professional skills needed to integrate the use of technology and chemistry databases in their classes.

The Maker movement has started to influence the field of science education. However, a tension exists between the movement's informal grassroots learning emphasis on open-ended personalized projects and the requirements of the formal and standardized science education curriculum. This study explores how high school chemistry teachers in Israel experienced a 32-h professional development (PD) course on "Chemistry Teachers as Makers" as a vehicle to suggest specific recommendations that might productively introduce the Maker approach into high school chemistry education. By analyzing the course syllabus, in-depth interviews of four participating teachers, teacher projects, and reflections of the two course instructors, the study explores how the teachers experienced the PD Maker course, i.e., what interested them, how they compared themselves to Makers, how they navigated their open-ended projects, and what they perceived as the pros and cons for introducing Makers into chemistry education. The findings present five overarching themes that emerged from the data analysis, which provide the background to the study's four interconnected recommendations. The study contributes to the research literature on bridging the gap between the informal learning emphasis of the Maker movement with the formal educational emphasis of high school science, with a focus on the professional development of teachers.

Imagine being locked in a chemical lab with 4 "bombs" that will detonate within 60 min unless you neutralize them. You now must use your brain, chemical knowledge, intuition, and need a bit of luck to neutralize the bombs and escape unharmed... This is the concept behind "chemical escape", an activity for high-school students, which brings the extremely popular genre of "escape rooms" into the chemistry classroom; it engages students in learning, increases motivation, and bridges the gap between classroom chemistry and the real world, as well as allows for teamwork and peer learning. A mobile escape room was designed and built in Israel; it consisted of lab-based activities and was suitable for high schools. To date, the activity has been introduced to more than 350 chemistry teachers who then implemented it to over 1500 students. An evaluation questionnaire was developed on the basis of students' statements of their experience of the escape room (bottom-up); the results indicate that the students were highly engaged and motivated during the activity, and there was an appreciation for teachers' efforts to run the escape room, an increased feeling of efficacy, and effective teamwork. In this paper we provide a detailed description of all the puzzles and an explanation of how to operate it in a school lab.

Despite the advancements in the production and accessibility of videos and animations, a gap exists between their potential for science teaching and their actual use in the classroom. The aim of this study was to develop and evaluate an approach to boost chemistry and biology teachers’ Technological Pedagogical Content Knowledge (TPACK) and their confidence regarding the use of videos and animations in class, which are required for their effective implementation. Twelve experienced high-school chemistry and biology teachers participated in a professional development workshop including biochemistry and technological–pedagogical lectures along with video-editing instruction and practice. Teachers were provided with digital videos including high-resolution scientifically based animations and were encouraged to edit them based on their pedagogical experience and the needs of their class. We investigated how the workshop affected teachers' TPACK-confidence and TPACK. TPACK-confidence was assessed by pre- and post-workshop questionnaires and open-ended feedback questionnaires. TPACK was assessed by analyses of the edited digital videos and pedagogical considerations submitted by the teachers. It was found that teachers' TPACK-confidence was significantly higher following the workshop. There was also a development in the teachers' TPACK. They were able to recommend to use digital videos in a variety of classroom situations based on the technological pedagogical knowledge (e.g., as an opening to a new topic) and their TPACK (e.g., to visualize complex biochemical processes). We also found a development in their video-editing skills and their knowledge of how to use this technology effectively in biochemistry lessons. Results indicate that training teachers in using technological tools while providing them with relevant Content Knowledge and TPACK, and relying on their pre-existing Pedagogical Content Knowledge may assist them develop their TPACK and TPACK-confidence. This may promote the effective use of videos and animations in biochemistry teaching.

Chemistry teaching is undergoing a revolution! Aiming at helping chemistry lecturers to achieve more effective and engaging teaching, this special issue exposes the reader to modern pedagogies, cutting edge research in chemistry education, and novel ideas developed by leading chemistry education professionals. The cover picture was designed by Ziv Ariely, The Department of Science Teaching, Weizmann Institute of Science. Parts of the picture are taken from Shutterstock with permission.

The authors analyze chemistry teachers' discourse in a WhatsApp group. This online communication platform is used for continually studying the communication behavior of leading chemistry teachers who are members of a professional learning community (PLC). They describe the network of chemistry teachers' PLC in Israel, which provides the context for the study. WhatsApp enables sustained ongoing, intensive interaction, and sharing of knowledge that is practical, directly related to the members' needs, and is participant driven and constructivist in nature. A theoretical perspective of teachers' knowledge and professional development (PD) was developed in 2015 by Gess-Newsome, which was applied to examine the mechanism underlying teachers' knowledge development.

Although understandings of scientific inquiry (as opposed to conducting inquiry) are included in science education reform documents around the world, little is known about what students have learned about inquiry during their elementary school years. This is partially due to the lack of any assessment instrument to measure understandings about scientific inquiry. However, a valid and reliable assessment has recently been developed and published, Views About Scientific Inquiry (VASI; Lederman et al. [2014], Journal of Research in Science Teaching, 51, 65-83). The purpose of this large-scale international project was to collect the first baseline data on what beginning middle school students have learned about scientific inquiry during their elementary school years. Eighteen countries/regions spanning six continents including 2,634 students participated in the study. The participating countries/regions were: Australia, Brazil, Chile, Egypt, England, Finland, France, Germany, Israel, Mainland China, New Zealand, Nigeria, South Africa, Spain, Sweden, Taiwan, Turkey, and the United States. In many countries, science is not formally taught until middle school, which is the rationale for choosing seventh grade students for this investigation. This baseline data will simultaneously provide information on what, if anything, students learn about inquiry in elementary school, as well as their beginning knowledge as they enter secondary school. It is important to note that collecting data from all of the approximately 200 countries globally was not humanly possible, and it was also not possible to collect data from every region of each country. The results overwhelmingly show that students around the world at the beginning of grade seven have very little understandings about scientific inquiry. Some countries do show reasonable understandings in certain aspects but the overall picture of understandings of scientific inquiry is not what is hoped for after completing 6 years of elementary education in any country.

Improving teaching and student learning in chemistry classrooms is an important goal that is constantly researched. Several comparative studies of science teaching have been carried out on different parameters, e. g. misconceptions which science teachers and students may have regarding the scientific concepts they learn and teach. Here we describe science teaching in general, and chemistry teaching in particular, in 12 countries including Israel. Different parameters are compared, including the hours that are devoted to science, the subjects included, the pedagogy, and teachers ' salaries. The survey covers all school levels: elementary school, secondary school and high school. At the high-school level, the comparison focused on chemistry studies. In this study the variances variables, such as the hours that are allocated for science teaching, did not show an appreciable effect on students ' achievements. It was also found that, in countries where chemistry studies at the high-school level are not mandatory, innovative pedagogies are more likely to replace the traditional chemistry teaching methods where chemistry is taught according to the structure of the subject based on basic concepts that underlie the curriculum. The study provided an additional support to the importance of the professional development of science and chemistry teachers and suggest that the autonomy that is given to them could influence the quality of science teaching and students ' achievements.

If we wish to integrate modern science such as nanotechnology into the school science curriculum, we need to find the natural insertion point of modern science with the science, technology, engineering and math curriculum. However, integrating nanoscale science and technology (NST) essential concepts into the middle school science curriculum is challenging. The current study was designed to identify the insertion points of the eight NST essential concepts in the middle school science and technology curriculum. Middle school science and technology teachers underwent a course that included all eight NST essential concepts, aiming to help them understand the NST essential concepts in depth. Then, they were asked to identify a natural insertion point in the existing science and technology curriculum for each of the NST essential concepts. To support research validation, two different groups of teachers participated in two sequential stages of the study (the identification stage and the validation stage). The teachers in the identification stage identified the insertion points of all eight NST essential concepts in the subjects of the science and technology curriculum, which reflects the relevance of the NST concepts from the teachers' perspective in terms of pedagogical level. The majority of the identified insertion points were validated in the second stage. Forty-two insertion points of the NST essential concepts were suggested to be integrated in middle school science and technology curriculum. All the insertion points that were suggested in the identification stage were confirmed in the validation stage. Another 11 new insertion points were added at the validation stage. The connections to the different scientific subjects in the curriculum are as follows: 19 insertion points were suggested by the teachers in the chemistry part of the chemistry curriculum, 12 in the life science, four in the physics-energy, and seven in technology-systems and products. The results present the opportunity to expose middle school students to contemporary science using the existing science and technology curriculum. The study serves as an example of integrating NST concepts into a middle school science curriculum in Israel, but it can be applied in other science curricula worldwide, taking into consideration the topics included in each curriculum.

The European Union (EU) encourages science education to be oriented towards the concept of Responsible Research and Innovation (RRI), i.e. socially and ethically sensitive and inclusive processes of science and technology. Connecting RRI to prevailing concepts in science education, such as the Nature of Science (NoS), may facilitate the incorporation of RRI in curricula and classrooms. We carried out a conceptual comparison between the EU's RRI policy and a recent reconceptualization of NoS, known as the expanded Family Resemblance Approach. We discuss how the socio-institutional nature of science in that approach closely connects to the RRI and can provide a means for RRI teaching. To illustrate these opportunities, we present practical classroom approaches developed in the EU-funded project IRRESISTIBLE, and survey results on teachers' perspectives on RRI. The aim of this work is to understand better the potential implications of RRI to research and practice in science education.

Regular high-school chemistry teachers view gifted students as one of several types of students in a regular (mixed-ability) classroom. Gifted students have a range of unique abilities that characterize their learning process: mostly they differ in three key learning aspects: their faster learning pace, increased depth of understanding, and special interests. If gifted students are to develop their abilities and potential, and learn optimally in a regular classroom, the teaching must be adjusted to meet their special needs. Chemistry high-school curricula have built-in potential to cater to the special needs of gifted students. Chemistry learning entails laboratory work and comprehension of abstract concepts. In the classroom, the interactions between teachers and students are core events that trigger other class events. In the present study the interactions between teachers and gifted students in a regular classroom, which are specific for chemistry teaching, were studied. Two general categories of interactions with gifted students were found to be unique to the chemistry classroom: (1) interactions involving laboratory work and (2) interactions involving the challenge of teaching chemistry content. We found that since gifted students master abstract chemistry concepts quickly and with minimum scaffolding, no interactions regarding this aspect were reported. Gifted students do not need all the instruction time teachers usually devote to explaining abstract concepts in chemistry, concepts that are considered difficult for other students. The present study indicates the essential need of enhancing chemistry teachers' knowledge regarding teaching gifted students in the chemistry classroom. This includes knowledge about how gifted students learn in general, and its adaptation to the chemistry classroom and the chemistry laboratory according to academic and curricular needs of the gifted students.

The chapter describes a reform in the Israeli education system that has significantly influenced chemistry teaching and learning. In this reform 30% of the final high-school chemistry grade was replaced by alternative assessment methods. These new standards of the nation-wide evaluation left the teachers with a great challenge, since they have neither knowledge about alternative assessment nor the experience to use it. In order to meet the chemistry teachers' needs, a professional development (PD) course was developed, emphasizing the use of student-curated exhibitions as an example of the alternative assessment method. This chapter describes the professional development course and includes a description of its different components. A research study that was conducted captured the teachers' perspectives regarding the use of student-curated exhibitions for alternative assessment. Teachers' challenges are described as well as the way they realize the advantages of using this approach and its adaptation to their school culture after they had an opportunity to self-curate an exhibition in the course. We found that the need to replace the evaluation methods encourages the chemistry teachers to deepen their knowledge of evaluation and assessment, and to understand the limitations and advantages of traditional evaluation and alternative assessment. Teachers also realized the strong reciprocal connection between the three components: teaching, learning, and evaluation.

Facebook is the most commonly used Social Network Site (SNS) in the world. In this paper we explore students' attitudes towards the use of SNSs as a platform for learning chemistry and provide recommendations based on students' preferences regarding what should be done in the Facebook groups and what the teachers should not do (Thou shall nots) in an educational Facebook group with their students. We evaluated the extent to which students use SNSs in general and their attitudes toward the presence of a medium for learning chemistry in their SNS in particular. We found that the active Facebook groups for learning chemistry are perceived overall as a contributing experience for students' learning, and there was a positive correlation between the chemistry learning activity in the groups and the attitudes of students toward using Facebook groups for learning chemistry. Both parameters have gradually increased over the two-year study period.

The purpose of this article is to trace the development, validation and use of a questionnaire for evaluating teacher and student attitudes regarding Responsible Research and Innovation (RRI). RRI is a framework, developed by the European Union, which provides general standards to guide the development of trust and confidence of the public regarding advances in science and technology, and the development of their participation in these advances. The article traces the development of the RRI framework and focuses on its educational component, whose goal is to sensitize teachers and students into "RRI-based thinking" about past and current scenarios regarding the development of science and technology advances. The use of the RRI questionnaire is demonstrated through the presentation of teacher and student data taken before and after the implementation of RRI-based modules, developed in the EU-funded Irresistible Project. Based on this work, we suggest that the RRI questionnaire can be used to assess the development of attitudes regarding RRI across diverse populations of teachers, students, scientists, consumers and other members of the general public.

The high-school chemistry curriculum is loaded with many important chemical concepts that are taught at the high-school level and it is therefore very difficult to add modern contents to the existing curriculum. However, many studies have underscored the importance of integrating modern chemistry contents such as nanotechnology into a high-school curriculum. When students are exposed to nanotechnology, they perceive chemistry as more relevant to their life, more modern than the chemistry they usually study at school, and consequently, their continuous motivation to study chemistry and related subjects increases. In the current study we identified topics in the high-school chemistry curriculum in Israel into which the essential nano-scale science and technology (NST) concepts can be integrated. Insertion points for all 8 NST essential concepts were found. We discuss the importance of ways by which chemistry educators can implement the results for updating the chemistry curriculum, thus making it more modern and relevant to the actual chemistry research that is conducted.

The goal of this research was to examine how Israeli chemistry teachers at high school level use Facebook groups to facilitate learning. Two perspectives were used: Teachers’ TPACK (Technological Pedagogical Content Knowledge) and the self-efficacy beliefs of chemistry teachers for using CLFG (chemistry learning Facebook groups). Three different case studies were chosen and qualitative and quantitative research tools were used to learn about the teachers’ self-efficacy beliefs and knowledge. More specifically, a validated questionnaire for measuring teachers’ self-efficacy beliefs for using Facebook and for integrating Facebook into teaching was developed. We show that the initial beliefs (not based on a real acquaintance of Facebook) were replaced by more realistic efficacy-beliefs after the teachers started to work with the CLFG and that the technological support provided to each teacher, together with their mastery experience, supported the development of strong self-efficacy beliefs regarding the use of CLFG. Teachers’ TPACK was investigated by analyzing their interviews and the interactions in their CLFG. We found that the notion regarding what constitutes learning in the CLFG had not changed during the experiment but rather, the teachers knew better how they can facilitate this leaning. In addition they better integrated links to videos and visualizations that supported understanding abstract chemistry concepts. Interestingly, the intervention that was conducted did not influence teachers’ perceptions of learning; however, it was found to serve as an additional tool for supporting their self-efficacy beliefs by providing vicarious experience for the teachers. We therefore recommend performing a longer intervention in the future.

Responsible Research and Innovation has become a core concept in many of the Horizon 2020 programs. In this article the concept of RRI is discussed in context of secondary education, and the interpretation used within the project 'Irresistible' is introduced. In the article several ways in which RRI can be incorporated in science classrooms are discussed, connected to the teaching of contemporary research taking place in universities as well as recent innovations coming from industry. The presented modules are designed in groups in which teachers work together with researchers, science educators and science center experts. As one of the educational approaches used in the modules, students created exhibits in which both the scientific content as well as the RRI concepts related to the content are demonstrated for the general public. These exhibits have been very successful as a learning tool.

Chemistry is related to almost every material, question, and topic. Chemical reactions take place in every living organism, in the environment, and in the industrial production of all the different products we use. Still it has a negative connotation for many laypersons. Educational links between contexts and the multi-perspective facets of chemistry aim to develop a better foundation for citizenship and responsible research and innovation (RRI). This chapter will give reasons for and explore such approaches of context-based learning in chemistry.

The present research is part of a longitude research study regarding the questioning behavior of students in the inquiry chemistry laboratory in Israel. We found that students who were involved in learning chemistry by the inquiry method ask more and higher-level questions. However, throughout the years, we have observed that differences between the two groups of students, control and the inquiry, have been reduced. The results of our study indicated that the gap between the Jewish and Arab students regarding their questioning ability is minor and inconsistent. If we assume that the source of this difference lies in the culture and different standards for teachers’ qualifications in the two sectors, our current results suggested that the differences between chemistry teachers in the two sectors are now diminished. Teachers from both sectors utilized the inquiry program as part of their teaching repertoire, and the students in the two sectors learned the inquiry skill of asking questions.

Nanoscale science and technology (NST) is an important new field in modern science. In the current study, we seek to answer the question: ‘What are the essential concepts of NST that should be taught in high school'? A 3-round Delphi study methodology was applied based on 2 communities of experts in nanotechnology research and science education. Eight essential concepts in NST were identified. Each concept is accompanied by its explanation, definition, importance and includes subcategories that compose it. Three concepts emerged in the Delphi study, which were not identified before: functionality, classification of nanomaterials, and the making of nanotechnology. Differences between the concepts suggested by the 2 communities of experts were found. The results of this study serve as a tool to examine different nanotechnology programs that were reported thus far and to make recommendations for designing a NST program for high school students that includes the essential concepts.

Understanding nanoscience and how nanotechnology works has proven challenging for high school students, especially if it is not one of the core concepts specified in the national science curriculum. Out-of-school activities can be adopted as a method for teaching the fundamentals ofnanotechnology. This paper presents two cases: one from Germany and one from Turkey, where high school students attended one-day out-of school activities on understanding the working principles of Atomic Force Microscopy (AFM), including the related concepts of size and scale, and intermolecularinteractions. In the German case, a teaching experiment group work activity included an educational AFM and introduced the students to this technique by using different kinds of media such as teaching models. The out-of-school activity in Turkey was designed to include guided-inquiry activitieswhere students were asked to predict individually, work in groups, conclude individually, and discuss and conclude in groups. The results of the analysis showed that students easily understood the working principle of AFM, gained a deeper understanding of the concepts of size and scale, butalso had difficulties in matching the right scale dimensions of objects, especially on the sub-micro level.

The 21st century presents many challenges for chemistry educators. Chemistry as an evolving entity is not reflected in the existing high school chemistry curriculum and the Web 2.0 generation is still learning in the previous century. My goal is to promote the modernization of both – chemistry contents and chemistry teaching pedagogies by promoting the chemistry teachers community.

Nanotechnology has been recognized in the 21st century as a new and modern science field. It is therefore necessary to update school science by integrating nanotechnology-related concepts into curricula for students in order to prepare an educated workforce and a responsible generation that will make scientifically literate decisions. The current study examines a unique way to address the teaching of the concept "the making of nanotechnology," one of eight essential concepts of nanotechnology that should be taught in high school and at the undergraduate level, which were identified by a recent study. The concepts' definition and explanation are presented. The main goal of the study is to learn how students' participation in a one-day nanotechnology conference "NanoIsrael 2014" NanoIsrael is a bi-annual conference and exhibition about nanotechnology, as will be described later in the paper. influences their perceptions regarding the concept "the making of nanotechnology". We compared students who had previous knowledge of nanotechnology and those who lacked it. The results of the study showed that the students' participation in the conference influenced their emotional perspectives, their knowledge concerning nanotechnology, as well as their curiosity and interest in science. The conference also influenced the students' motivation and future plans. Differences between the two groups were found mainly regarding their understanding of the basic concepts of nanotechnology.

Whether one examines teachers' effectiveness from the perspective of a legislator, parent, principal, or student, the main goal is to prepare teachers who have a strong knowledge base related to science, knowledge of effective teaching strategies, the ability to teach, and a desire to make a difference in the lives of their students. The underlying construct that influences each of these factors is teachers' self-efficacy.

The 21st century presents many challenges for chemistry educators. Chemistry as an evolving entity is not reflected in the existing high-school chemistry curriculum. The goal of the current study is to examine teachers’ perceptions regarding introducing advanced topics in chemistry for high-school students by using a poster exhibition of contemporary organic chemistry. Four different groups of chemistry teachers participated in the study. The groups differ in their Content Knowledge (CK), and their experience in using the poster exhibition. The poster exhibition served as an effective means of support for teachers when high-school students were introduced to contemporary chemistry topics. CK was found to be an important component that positively influences teachers’ self-efficacy for using the poster exhibition in their class. However, the teachers’ CK was insufficient; the feelings of ownership and mastery experience are also important influential components that should be considered.

This paper describes the rationale and the implementation of five laboratory experiments; four of them, intended for high-school students, are inquiry-based activities that explore the quality of water. The context of water provides students with an opportunity to study the importance of analytical methods and how they influence our everyday lives. It also provides an opportunity to expose students to scientific methods (e.g., inquiry) and behavioral responsibility that could influence their future lives as citizens. The inquiry-based activities consist of two parts. In the preliminary experiment, an analytical technique was introduced and the students learned analytical skills. On the basis of these preliminary experiments, the students designed inquiry-based laboratory experiments involving relevant questions and decision making. Students explored parameters concerning water quality from different sources and had an opportunity to evaluate the data critically and to answer questions such as the following: Should we drink bottled water or tap water? How is the water quality monitored? What does water contain? The experiments involve qualitative and quantitative analyses of water salinity, water hardness, and the presence of organic compounds (volumetric versus spectrophotometric analysis of chloride in water), as well as determining water hardness by EDTA complexometric titration and water filtration.

In this chapter, we present four different professional development programmes for in- and pre-service teachers and the accompanying research in the area of nanoscience and technology. First, we will present a review of the literature to lay out the field of conditions and approaches introducing nanoscience and nanotechnology into programmes for in- and pre-service teachers. This introduction will be followed by the four projects. The first study explores the goals and preconditions of introducing nanoscience into pre-service teacher education programmes; the second reports experiences from a programme for pre-service teachers. The third programme offers teachers authentic insights into research facilities. The fourth project reports about the design of an in-service teacher training programme focusing specifically on the use of models to teach and learn important nano techniques, such as atomic force microscopy. Those exemplary projects have been accompanied by different qualitative and quantitative research approaches which will also be outlined. The results of all four programmes clearly show the need for further investigations and course developments, based on the pre- and in-service teachers’ needs. They also give hints on successful tools and structures that could be used in other programmes on nanoscience, in modern scientific areas of interest for education as well.

The goal of this research was to examine the change in the skills, Technological Pedagogical Content Knowledge (TPACK) and self-efficacy beliefs of chemistry teachers regarding video editing and using YouTube videos in high-school chemistry lessons, as a result of a professional development program that focused on editing YouTube videos and the accompanying teaching pedagogy. Sixteen experienced chemistry teachers participated in a professional development course regarding video editing skills and the use of videos in chemistry teaching in Israel. Research tools consisted of (1) a pre-post questionnaire, (2) interviews with teachers, (3) an analysis of the videos they edited (which were part of the course assignment), and (4) follow-up interviews conducted ten months after the end of the course. It was found that teachers improved their skills and developed a unique TPACK that combines videos with chemistry teaching needs. Self-efficacy beliefs were found to be high for most of the teachers: they all trusted in their ability to integrate videos in their chemistry teaching but not all of them were confident in their video editing skills.

The first part of the chapter aims at offering some general background information about multiple meanings and models in chemistry and chemistry education. A number of students ' difficulties in understanding these issues and factors that offer insight in their difficulties are also given. The second part of the chapter aims at providing three clusters of useful suggestions for the practice of teaching. The first cluster consists mainly of content-related suggestions for teaching multiple meanings and models, while the second cluster mainly covers student-related suggestions for teaching these issues. The third cluster regards suggestions for identifying students ' (alternative) conceptions after teaching. Some suggestions are rather specific while others are more general; the latter allows teachers to adapt and elaborate them for use in the specific situation of their own classroom.

Traditionally, most teachers, both during their pre-service training as well as during their in-service experience, are exposed to only the conceptual structure and processes of chemistry. However, teaching chemistry most effectively necessitates both content knowledge as well as pedagogical content knowledge. Regarding the content knowledge, it is suggested that in the teaching and learning of chemistry, students should be exposed to recent investigations, namely the “frontiers of chemistry,” as well as inquiry-based problems. This approach to high school chemistry places great demands on chemistry teachers. In order to cope with the problems mentioned above, a special program for enhancing chemistry teachers’ content knowledge as well as their pedagogical knowledge was launched at the Weizmann Institute of Science. The program, which was designed for chemistry teachers, consists of three steps, in which the teachers attend (1) course lectures together with the regular MSc students, (2) a follow-up tutoring lesson which was prepared especially for teachers by one of the staff scientists and elaborates on the course lecture, and (3) a workshop coordinated by a researcher from the science teaching group, in order to apply the scientific knowledge to the educational field.

Nanotechnology has been touted as the next 'industrial revolution' of our modern age. In order for successful research, development, and social discourses to take place in this field, education research is needed to inform the development of standards, course development, and workforce preparation. In addition, there is a growing need to educate citizens and students about risks, benefits, and social and ethical issues related to nanotechnology. This position paper describes the advancements that have been made in nanoscale science and nanotechnology, and the challenges that exist to educate students and the public about critical nanoscience concepts. This paper reviews the current research on nanotechnology education including curricula, educational programs, informal education, and teacher education. Furthermore, the unique risks, benefits and ethics of these unusual technological applications are described in relation to nanoeducation goals. Finally, we outline needed future research in the areas of nanoscience content, standards and curricula, nanoscience pedagogy, teacher education, and the risks, benefits, and social and ethical dimensions for education in this emerging field.

A nanotechnology module was developed for ninth grade students in the context of teaching chemistry. Two basic concepts in nanotechnology were chosen: (1) size and scale and (2) surface-area-to-volume ratio (SA/V). A wide spectrum of instructional methods (e.g., game-based learning, learning with multimedia, learning with models, project based learning, and storytelling and narratives) was implemented to support students' understanding. Students' interviews and the content of students' final projects were used and analyzed to learn how using a variety of teaching methods influenced students' understanding of basic concepts in nanotechnology. In addition, the study examined which methods enhance students' understanding and which do not, according to students' perceptions. Students felt that most of the teaching methods facilitated their learning, with the exception of two activities: the Hungarian cube, and nano effect simulation; these two activities were very abstract and confused the students. Finally, we formulated recommendations regarding methods for teaching nanotechnology in the future.

Discussions held in the chemical education community have generated a variety of reports and recommendations for reforming the chemistry curriculum. The recommendations refer to teaching chemistry in the context of real-world issues. This has been suggested as a way to enhance students' motivation. It is suggested that real-world problems emphasize the interdisciplinary nature of chemistry and the relevance of chemistry to the students' lives. An attempt was made to incorporate these recommendations into the teaching of chemistry by teaching analytical chemistry together with environmental chemistry. A unit incorporating analytical chemistry in an environmental context was developed, in which the students learn concepts of a specific environmental issue. The unit "I Have Chemistry with the Environment", consisting of two modules, was developed on the topics of drinking-water quality, and the greenhouse effect. The research questions focus on the change in the attitudes and perceptions of the students toward chemistry and environmental issues, after learning the environmental unit. The results indicate that the students underwent a significant change in their awareness of environmental issues. All the students mentioned that the unit influenced their everyday-life perceptions of environmental issues and that their awareness of environmental issues increased. Another important finding was that more students found that learning the "I Have Chemistry with the Environment" unit encouraged them to learn chemistry. They indicated that they especially appreciated the feeling that they could discover things by themselves. Clearly, the students found that learning the unit was relevant to chemistry learning as well as to their personal lives. Researchers believe that such a program may promote education for sustainable development.

Nanoscience is an important new field in modern science. It deals with the ability to create materials, devices, and systems having fundamentally new properties and functions by working at the atomic, molecular, and macromolecular levels. Many teachers in the educational system have relatively limited knowledge related to nanochemistry and nanotechnology, as they completed their training well over 10 years earlier. The current paper describes an advanced course for teachers in materials and nanotechnology. The course was designed to make chemistry teachers nanoliterate by providing them with the basic principles of nanoscience, enabling them to independently study any subject in nanoscience, and elevating their enthusiasm for chemistry. The course is structured with content introduced initially followed by opportunities to apply concepts. The course presents fundamental knowledge required to understand topics in nanoscience and advanced materials characterization. The teachers then apply this knowledge while independently studying one topic that they select themselves. Research lab experiments follow, offering an additional opportunity for knowledge integration.

The Scientific Revolution established science as a source for the growth of knowledge. During the 19th century, the practice of science became professionalized and institutionalized in ways that continued through the 20th century. As scientific knowledge rapidly increased in society, it was incorporated into many aspects of the characteristics and functions of nations and states. A chain of advances in knowledge, which have always complemented each other, has marked the history of science. Technological innovations bring about new discoveries, which lead to other innovations, which inspire new possibilities and innovative approaches to long-standing scientific issues and open questions

In this paper we describe the learning process of a group of experienced chemistry teachers in a specially designed workshop on molecular symmetry and continuous symmetry. The workshop was based on interactive visualization tools that allow molecules and their symmetry elements to be rotated in three dimensions. The topic of continuous symmetry is a new field of study that provides a quantitative description of the distance of a specific structure from perfect symmetry. Using novel online tools, teachers were able to perform these calculations with the emphasis on the chemistry, rather than on the mathematics of the calculations. Our results show that even a very basic knowledge of symmetry and continuous symmetry opens up new ways of thinking about and looking at molecules. The addition of visualization tools creates a deeper understanding of molecular structure. Moreover, even though molecular symmetry is not a mandatory part of the chemistry high-school curriculum in Israel, familiarity with concepts of symmetry can help teachers understand and explain other topics, such as chirality and the polarity of molecules. Our results indicate that highly advanced content can influence the way teachers think, understand and teach. This experience can shed light on curriculum choices for teachers' education.

In order to help teachers to bring their students into contact with the frontiers of chemistry, a special program for enhancing chemistry teachers' content knowledge as well as their pedagogical knowledge was launched at the Weizmann Institute of Science. The program, which was specifically designed for the chemistry teachers, consists of three stages, in which the teachers attended (1) the course lectures, together with the regular M.Sc. students, (2) a 'Follow-up' tutoring lesson, which was prepared especially for them by one of the staff scientists and was aimed at elaborating on the course lecture, and (3) a workshop coordinated by a researcher from the science teaching group, in order to apply the scientific knowledge to the educational field. The model reduced the teachers' anxieties resulting from taking academic scientific courses; they gained modern and advanced scientific content knowledge, and succeeded in applying it in their teaching.

The study describes the process of adopting new curriculum materials, which had been developed in the PARSEL project in several European countries, into the local educational science classroom of another country. The goal of the PARSEL project was to raise the popularity and relevance of science teaching by enhancing students scientific and technological literacy and by identifying suitable teaching/learning materials, based on relevant context-based educational approaches. All PARSEL materials are organized in a website and are freely accessible by science teachers around the world. In order to increase the teachers ownership towards the new materials, a "bottom-up" approach that included a teacher workshop for modifying the PARSEL modules for the needs of teachers was implemented. The teachers used the modified modules in their classes and reflect upon the whole process, after it was completed. Data have been collected using various research tools, such as, teachers questionnaires, teachers interviews and teachers focus group interviews. The results indicate that the "bottom-up" process increased teacher ownership towards the PARSEL modules and helped the teachers to align their teaching with the philosophy and the teaching style of the PARSEL project. It was also indicated that the students found the modules to be popular and interesting. (Contains 1 figure and 3 footnotes.)

This paper describes the implementation of an open-ended inquiry experiment for high-school students, based on gas chromatography (GC). The research focuses on identifying the level of questions that students ask during the GC open inquiry laboratory, and it examines whether implementing the advanced inquiry laboratory opens up new directions for students' questions. We found correlations between students' achievements and the level of their inquiry questions, and showed that the GC open-ended inquiry laboratory engaged students with different abilities and helped them deepen their understanding in various ways, according to their different levels.

N⁶-(2-Aminoethyl)-FAD is covalently linked to a thioctic acid monolayer associated with an Au-electrode. The surface coverage of the FAD units is 2.2 x 10^-11 mol cm^-2. Apo-glucose oxidase (apo-GOx) reconstituted onto the FAD monolayer, yields a bioelectrocatalytically active enzyme layer, GOx, at a surface coverage of 2 x 10^-12 mol cm^-2. In the presence of N-dimethyl- 2-aminoethyl ferrocene (I) as diffusional electron mediator, the enzyme electrode stimulates the bioelectrocatalyzed oxidation of glucose. A photoisomerizable nitrospiropyran-FAD mixed monolayer is assembled on an Au- electrode. The surface coverage of the FAD units is 2 x 10^-11 tool cm^-2, and the molar ratio of the nitrospiropyran and FAD units is 3:4. Reconstitution of apo-GOx onto the FAD sites of the photoisomerizable nitrospiropyran-FAD mixed monolayer yields a photoswitchable enzyme electrode for the light-stimulated oxidation of glucose in the presence of I as electron mediator. The photoswitchable properties of the enzyme electrode originate from the electrostatic repulsion of the positively charged electron mediator from the electrode interface. The GOx-reconstituted-monolayer electrode represents an optobioelectronic assembly for the amplified amperometric transduction of photonic signals recorded by the photoisomerizable monolayer.

Ordered layered three-dimensional networks of Au, Ag and Au/Ag colloids are assembled in a stepwise synthesis using N,N′-bis(2-aminoethyl)-4,4′-bipyridinium as a redox-active crosslinker.

Functionalized monolayer electrodes provide the grounds for bioelectronic and optobioelectronic devices. Reconstitution of apo-glucose oxidase, apo-GOx, onto a pyrroloquinoline quinone-FAD diad, assembled as a monolayer on a Au-electrode, yields an aligned bioelectrocatalytically active enzyme on the electrode surface. The resulting reconstituted enzyme electrode exhibits superior electrical contact with the electrode surface and acts as an amperometric glucose sensing electrode. The enzyme electrode operates under oxygen and is unaffected by interfering substrates such as ascorbic acid. Photoswitchable redox proteins integrated with electrode surfaces act as active systems for the amplified amperometric transduction of recorded optical signals. Chemical modification of glucose oxidase by photoisomerizable nitrospiropyran units or reconstitution of apo-GOx with a photoisomerizable nitrospiropyran FAD diad, yield photoisomerizable glucose oxidase with photoswitchable biocatalytic features. Assembly of the photoactive enzymes as monolayers on the Au-electrode results in functionalized surfaces for the cyclic 'ON-OFF' amplified amperometric transduction of recorded optical signals. A further method to photostimulate the electrical contact between a redox protein and an electrode involves the functionalization of the electrode with a photoisomerizable monolayer interface. A mixed monolayer consisting of pyridine and nitrospiropyran units was used to photoregulate the association and dissociation of cytochrome c to and from the monolayer assembly. The photostimulated electrical contact of cytochrome c with the monolayer electrode was employed to mediate the bioelectrocatalyzed reduction of oxygen in the presence of cytochrome oxidase, COx. The latter system provides an assembly for the cyclic amperometric transduction of recorded optical signals.

Antigen monolayers assembled onto Au electrodes associated with a quartz crystal act as electrochemical or microgravimetric quartz-crystal-microbalance (QCM) sensing interfaces for the complementary antibody. Electrochemical analysis of the antibody (Ab) is based on the insulation of the antigen monolayer electrode by the associated Ab towards a redox probe in the electrolyte solution. Ferrocene-modified glucose oxidase (Fc-GOx) and glucose are employed as redox probes for the amperometric transduction of the Ab association to the electrode. Bioelectrocatalyzed oxidation of glucose provides an electrochemical route to amplify the antigen-Ab complex formation. Electrochemical analysis of the dinitrophenyl antibody, DNP-Ab, by a dinitrophenyl-lysine monolayer electrode is presented. QCM analysis of the Ab is based on the frequency changes of the quartz crystal resulting from the association of the Ab to the crystal assembly. This method is discussed with the analysis of the fluorescein antibody, Flc-Ab, using a fluorescein monolayer-modified quartz crystal. A novel method to tailor reversible immunosensor devices by the application of photoisomerizable antigen monolayers on electrodes is presented. The antigen is modified by photoactive units exhibiting reversible photoisomerizable properties. In one photoisomer state, the antigen exhibits affinity for the Ab and enables its electrochemical or QCM analysis. Photoisomerization to the complementary state perturbs the antigen structure and the monolayer lacks affinity for the Ab. This enables the washing-off of the Ab and the regeneration of the actively sensing interface by a second illumination process that restores the antigen monolayer-modified surface. This method is exemplified by the development of a reversible DNP-Ab sensing electrode. N-Mercaptobutyl dinitrospopyran was assembled as a photoisomerizable monolayer on a Au electrode. The dinitrospiropyran monolayer, SP-state, exhibits affinity for the DNP-Ab and enables the amperometric detection of the Ab using Fc-GOx and glucose as redox probe. The complementary photoisomerized protonated dinitromerocyanine monolayer, MRH+-state, lacks affinity for the DNP-Ab. By photoisomerization of the DNP-Ab associated with the SP-monolayer electrode to the MRH+-monolayer state, the DNP-Ab is washed-off, and by a second illumination process, the MRH+-monolayer is re-isomerized to the SP-monolayer assembly, which is the active interface for further analysis of the DNP-Ab. Cyclic amperometric detection of the DNP-Ab by the photoisomerizable dinitrospiropyran monolayer is demonstrated. The association of the DNP-Ab to the SP-monolayer electrode and the dissociation of the Ab from the MRH+-monolayer electrode are confirmed by QCM experiments using a dinitrospiropyran monolayer-modified quartz crystal.The insulating features of an antigen-Ab complex on a conductive surface and the photochemically controlled association of an antibody to a photoisomerizable monolayer assembled onto the surface were used to develop means for micropatterning of surfaces by the antibody. A dinitrospiropyran antigen monolayer was assembled onto conductive ITO glass. A DNP-Ab solution was used as ‘ink solution’ to pattern the surface. The Ab-pattern was imaged by electrochemical copper deposition onto the Ab-lacking surface domains. The dinitrospiropyran monolayer assembled onto ITO or Pyrex glass surfaces was employed as an active interface for the photolithographic patterning of the surface with the DNP-Ab. Irradiation of the dinitrospiropyran monolayer, SP-state, through a grid-mask generated surface domains of protonated dinitromerocyanine, MRH+-state, which lacks affinity for the DNP-Ab. The DNP-Ab covalently-linked to agarose beads (50 μm) was selectively associated to the SP-monolayer sites and the micro-pattern of the resulting antibody was imaged. Methods for employing this photolithographic patterning of DNP-Ab to generate microstructures of any biomaterial, and, specifically, neural networks, are discussed.

Antigen monolayers assembled onto Au-electrodes or Au-electrodes associated with quartz crystals act as active interfaces for the amperometric or microgravimetric analysis of the complementary antibody and provide the grounds for the development of electrochemical and piezoelectric immunosensors. The antigen monolayer of Nε-2,4-dinitrophenyl-L-lysine is assembled on an electrode. The anti-dinitrophenyl antibody, anti-DNP-Ab, is sensed by the antigen monolayer, and the formation of the antigen-antibody complex at the monolayer interface is probed by the insulation of the electrode toward a redox probe in the electrolyte solution. The formation of the antibody-antigen complex is amplified by the application of the anti-antibody or the use of a ferrocene-functionalized redox-enzyme, glucose oxidase, as redox probe. A 3,5-dinitrosalicylic acid antigen monolayer bound to Au-electrodes associated with a quartz crystal is used as active interface for the microgravimetric, quartz-crystal-microbalance analysis of the anti-DNP-Ab. Photoisomerizable antigen monolayer electrodes provide the basis for tailoring reversible immunosensors. The dinitrospiropyran monolayer, SP-state, is assembled on Au-electrodes or quartz crystals. The monolayer exhibits reversible photoisomerizable features, and irradiation of the SP-monolayer, 360 +-state. Further irradiation of the MRH⁺-monolayer electrode, λ >495 nm, restores the SP-monolayer electrode. The SP-monolayer acts as antigen for anti-DNP-Ab, whereas the MRH⁺-monolayer lacks antigen properties for anti-DNP-Ab. This enables the amperometric or piezoelectric transduction of the formation of the antigen-anti-DNP-Ab complex at the SP-monolayer interface. By photoisomerization of the monolayer to the MRH⁺-state, the Ab is washed-off from the sensing interface. Subsequent light-induced isomerization of the monolayer to the SP-state regenerates the electrochemically or piezoelectrically active sensing interfaces.

Apo-glucose oxidase is reconstituted with the semisynthetic nitrospiropyran-FAD cofactor to yield a photoisomerizable glucose oxidase, 3a-GOx. The nitrospiropyran-FAD-reconstituted GOx, 3a-GOx, undergoes reversible photoisomerization to the protonated nitromerocyanine-FAD GOx, 3b-GOx. The photoisomerizable enzyme was assembled as a monolayer on a Au electrode. The bioelectrocatalyzed oxidation of glucose in the presence of ferrocenecarboxylic acid (4), fenocene-1,1'-dicarboxylic acid (5), or 1-[1-(dimethylamino)ethyl]ferrocene (6), acting as electron mediators, was examined in the different photoisomer states of the enzyme. With 4 and 5 acting as electron mediators, the enzyme in state 3b-GOx exhibited bioelectrocatalytic activities for the oxidation of glucose. The bioelectrocatalytic functions of the enzyme in state 3a-GOx were blocked in the presence of 4 or 5. With 6 acting as electron mediator, the enzyme in state 3a-GOx exhibits bioelectrocatalytic activities for the oxidation of glucose, whereas the bioelectrocatalytic functions of the 3b-GOx state are blocked. The directionality of the enzyme photoswitch is controlled by the affinities of the oxidized electron mediators to diffusionally penetrate the protein and reach appropriate electron transfer distances to oxidize the FADH2 redox center of the enzyme. In all of the systems, cyclic amperometric transduction of optical signals recorded by the photoisomerizable enzyme is accomplished. The enzyme photoisomer 'on' or 'off' switching direction is controlled by tuning the electrical interactions of the electron mediator and the photoisomerizable enzyme.

The study of direct electrical communication between reaction centers of enzymes and electrodes bridges fundamental work on electron transfer through proteins and practical work on biosensors. ^1,2 Such electrical communication has been realized earlier through modification of enzymes with electron relays, ^3,4 through modification of their peripheral oligosaccharides with relays pendant on termini of flexible spacer chains, ⁵ and through relays in electron-conducting hydrogels within which enzymes were covalently bound. ⁶ Recently, electrical communication, through a defined molecular path, was achieved by reconstituting apo-glucose and apo-d-amino acid oxidases with a ferrocene-modified FAD cofactor. ⁷ Here we report a novel method to assemble an enzyme electrode by reconstitution of apo-glucose oxidase on a pyrroloquinoline quinone/FAD (PQQ/FAD) monolayer associated with an Au-electrode. The resulting enzyme layer reveals efficient electrical contact with the electrode and stimulates effectively the electrobiocatalyzed oxidation of glucose.

Insulation of the electrical contact between a redox protein and an electrode surface upon association of an antibody to an antigen monolayer assembled on the electrode is used to develop immunosensor devices. In one configuration, a mixed monolayer consisting of the N∈-(2,4-dinitrophenyl)lysine antigen and ferrocene units acting as electron transfer mediators is applied to sense the dinitrophenyl antibody (DNP-Ab) in the presence of glucose oxidase (GOx) and glucose. In the absence of DNP-Ab, the mixed monolayer electrode stimulates the mediated electrocatalyzed oxidation of glucose that results in an amplified amperometric response. Association of the DNP-Ab to the modified electrode blocks the electrocatalytic transformation. The extent of the electrode insulation by the DNP-Ab is controlled by the Ab concentration in the sample. In the second configuration, a N∈-(2,4-dinitrophenyl)lysine antigen monolayer assembled on a Au electrode is applied to sense the DNP-Ab in the presence of a redox-modified GOx, exhibiting electrical communication with the electrode surface. Two kinds of redox-modified "electrically wired" GOx are applied: GOx modified by N-(ferrocenylmethyl)caproic acid, Fc-GOx, and a novel electrobiocatalyst generated by reconstitution of apo-GOx with a ferrocene-modified FAD semisynthetic cofactor. Electrocatalytic oxidation of glucose by the electrically wired biocatalysts proceeds in the presence of the antigen monolayer electrode, giving rise to an amplified amperometric signal. The electrocatalytic transformation is blocked upon association of the DNP-Ab to the monolayer electrode. The extent of electrode insulation toward the bioelectrocatalytic oxidation of glucose is controlled by the DNP-Ab concentrations in the samples. The application of biocatalysts for amperometric sensing of antigen-antibody interactions at the electrode surface makes the electrode insensitive to microscopic pinhole defects in the monolayer assembly. The antigen monolayer electrode is applied to sense the DNP-Ab in the concentration range 1-50 μg mL^-1.

Here we wish to report on a novel method to tailor photoswitchable redox biocatalysts by reconstitution of apo-flavoenzymes with a nitrospiropyran modified flavin adenine dinucleotide, FAD, cofactor. We demonstrate a novel method a organize photoswitchable redox proteins for amperometric transduction of optical signals. The method consists of reconstitution of a flavo-apoenzyme, apo-GOD, with a synthetic FAD analog modified by a nitrospiropyran photosiomerizable unit. The protein implanted photoisomerizable group delicately controls the protein structure in the FAD cofactor surrounding. The site-specific modification of the enzyme by the photoisomerizable units through the application of the reconstitution methodology reconstitution methodology represents a major advance in designing photoswitchable enzymes. It enables further structural characterization of the biocatalyst and elucidation of the steric perturbations of the protein stimulated by photoisomerizable components.

A dinitrospiropyran antibody (DNP-Ab) photoisomerizable monolayer is assembled onto an indium tin oxide (ITO) conductive glass. The monolayer exhibits photoswitchable affinities for the DNP-Ab. The dinitrospiropyran monolayer state (SP) exhibits high affinity for the DNP-Ab, where the merocyanine photoisomer state (MR) lacks affinity for the Ab. Association of the Ab to the monolayer results in local insulation of the surface. The insulation of the ITO glass by the associated Ab and the photoswitchable binding of the DNP-Ab provides a means of mechanically patterning and photolithographically microstructuring the monolayer-modified surface. Application of the DNP-Ab solution as "ink" allows the mechanical patterning of the dinitrospiropyran monolayer (SP) and imaging of the pattern by electrodeposition of Cu onto the Ab-lacking domains. Photolithographic patterning of the dinitrospiropyran monolayer is accomplished by irradiation of the surface through a grid. Selective association of the agarose-bound DNP-Ab to the SP photolithographed pattern results in the microstructure of agarose particles containing the Ab.

NA

NA